Defining line fields 3-20, Line types 3-20, Lines 3-20 – Avery Dennison Sierra Sport2 9460 Programmer Manual User Manual
Page 68: Defining lines 3-20, Defining 3-20, Defining as segment 3-20, Defining as vectors 3-20, Determining distance 3-20, Defining line fields -20, Line types -20
D e f i n i n g L i n e F i e l d s
Use lines to form borders and mark out original prices. Define each line
separately. This field is not assigned a field number, but is counted as a
field (keep this in mind, as the printer allows a maximum of 200 fields per
format). You can define any line length and a thickness up to 99 dots, as
long as the solid black print does not exceed 30 percent of any given square
inch of the label.
L i n e Ty p e s
You can create horizontal and vertical lines. There are two ways to define
lines.
Segments
You choose the starting point and ending point.
Vectors
You choose the starting point, the angle, and the length
of the line.
Syntax
L,type,row,column,angle/end row,length/
end col,thickness,"pattern"
p
L1. L
Line Field.
L2. type
Type of line. Only vertical and horizontal lines are supported. Options:
S
Segment. You choose the starting point and
ending point.
V
Vector. You choose the starting point, angle, and
length.
L3. row
Distance from bottom of print area to the starting
point.
English
0 - 1200
Metric
0 - 3045
Dots
0 - 2436
L4. column
Distance from left edge of the print area to line origin.
English
0 - 189
Metric
0 - 479
Dots
0 383
3-20 Defining Fields