Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 40)

Each buffer’s allocated memory remains in effect until that buffer is
reallocated. For this reason, you may want to reallocate all the buffers
when reallocating any buffer. If you reallocate more memory than you have
available, you will receive an error.
Syntax
{ I,M,buffer,de vice,buffer_size p }
M1. M Memory Configuration Packet
M2. buffer Buffer type. Options:
D Downloadable Fonts
F Format
I Image
R Receive
T Transmit
V Scalable (vector) fonts
M3. device Storage type. Use R (volatile RAM).
M4. buffer size Buffer size. Options:
Buffer Range Default
Transmit .5K- 4K 10K
Receive 2K- 16K 40K
Image 16K-114K 38.9K
Downld. Fonts 64K-128K 64K
Scalable Fonts 10K-128K 64K
Formats 16K- 128K 16K
Internal cannot reallocate cannot reallocate
Note: For the scalable font buffer, specify 10 if you do not use the buffer.
When using the buffer, specify a minimum of 40. The larger the
number you specify for the image buffer, the longer your formats
can be. As a rule of thumb, divide the value you select by 100,
and round up to the next whole number. That number will be the
length in inches.
Example { I,M,I,R,1530 p }
Stores the image buffer in volatile RAM and allocates 153K for it.
2-22 Configuring the Printer