Batch errors 8-8, Option errors 8-8, Batch errors -8 – Avery Dennison Sierra Sport2 9460 Programmer Manual User Manual
Page 140: Option errors -8
051
Imaging mode in the graphic header must be 0.
B a t c h E r r o r s
Error
Code
Description
101
The format referenced by batch is not in memory.
102
Print quantity is outside the range 0 to 24.
104
Batch mode must be N (new) or U (update).
105
Batch separator in a batch control field must be 0 (Off).
106
Print multiple is outside the range 1 to 24.
107
Cut multiple is outside the range 0 to 999. Only valid for printers
with a knife.
108
Multiple part supply is outside the range 1 to 5.
109
Cut type is outside the range 0 to 5. Only valid for printers with a
knife.
O p t i o n E r r o r s
Error
Code
Description
200
Option number must be 1, 2, 4, 30, 31, 42, 50, 51, 52, 60, or 61.
201
Copy length is outside the range 0 to 2710.
202
Copy start position must be 1 to 2710.
203
Destination start position must be 1 to 2710.
204
Source field must be 0 to 999.
205
Copy type must be 1 (copy after rules) or 2 (copy before rules).
8-8 Diagnostics and Errors