Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 117)

Example {Format}
{Batch Packet}
{Batch Packet}
B a t c h Q u a n t i t y Z e r o M e t h o d
You may use the batch quantity zero method when your application requires
operator intervention to enter data. While the operator is entering data, the
previous field is sent with a batch quantity of zero. The printer images the
field, but does not print it. After the operator enters the data for the last
field, the batch quantity can be specified. The last remaining field is
imaged, and the label prints almost immediately.
To use the batch quantity zero method:
1. Send the format and a batch header in one file. The first time you send
the batch header, use the parameter N (new batch), and the parameter
0 for (zero quantity). This ensures the label is properly positioned.
The printer images constant text, line, and box fields, but does not print
them.
2. Input data for each field, and send it with a batch header using the
parameter U (batch update) and a quantity of zero. When the printer
receives the data, it immediately images the field, but does not print it.
At this time, the printer is imaging all associated fields, including fields
that copy from other fields.
3. Repeat step 2 for each field except the last one.
4. For the last field, input data and send a batch header with the quantity
of labels you want printed. When the printer receives input for the last
field, it immediately prints the labels. See “Reducing Imaging Time” in
Chapter 9 for an example using the batch quantity zero method.
Printing 6-9