Alignment,bar code 3-15, Bar code alignment 3-15, Justification 3-15 – Avery Dennison Sierra Sport2 9460 Programmer Manual User Manual
Page 63: Rotating 3-15, Selecting human readables 3-15, Bar code field 3-15, Bar code rotation 3-15, Selecting 3-15, Of bar code 3-15, Bar codes 3-15
B9. height
Bar code height, in 1/100 inches, 1/10 mm, or dots. Minimum values:
English
20
Metric
51
Dots
41
POSTNET, PDF417, and MaxiCode bar codes have a fixed height.
Always use 0 for these bar codes.
Small Data Matrix and QR Codes may not be scannable. The Data Matrix
and QR Code’s height depends on the number entered for this parameter.
For example, if you select 80, the symbol could be smaller than 0.80," but it
will not be greater than the amount specified in this parameter. The symbol
arranges the data according to rows and columns within the specified
height.
For Quick Response bar codes, the value you enter is the symbol's
maximum height. Small bar codes may not be scannable.
B10. text
Appearance of text with bar code. For UPC and EAN only use 0 to 7. For
all others, use 8, except where noted. Options:
0
Default
MaxiCode Mode 0 (obsolete)
QR Code Model 2
1
No check digit or number system
QR Code Model 1
2
MaxiCode Mode 2 (Numeric Postal Code)
QR Code Model 2
3
MaxiCode Mode 3 (Alphanumeric Postal Code)
5
Number system at bottom, no check digit
6
Check digit at bottom, no number system
7
Check digit and number system at bottom
8
No text, bar code only
MaxiCode (autodetect modes 0, 2, or 3)
Data Matrix
B11. alignment
Choose L, R, C, B or E to align the bar code data correctly in the field. B
centers variable width bar codes, which may not allow pad-character
centering (Code 128, Code 39, etc.) E right justifies variable width bar
codes. MaxiCode, Data Matrix, and QR Code
must use L.
B12. field rot
Field rotation. Field rotation rotates the whole field, not just the characters.
Rotation is affected by the pivot point, which varies depending on how text
is justified. Lower left corner of field is the pivot point. Options:
0
Top of field points to top of supply
(Use for Maxicode)
1
Top of field points to left of supply
2
Top of field points to bottom of supply
3
Top of field points to right of supply
Note:
Serial bar codes printed at speeds greater than 2.0 IPS may not
scan properly.
Defining Fields 3-15