Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 52)

T6. column Distance from the left edge of the print area to the
pivot point to find the column location.
English 0 - 189
Metric 0 - 479
Dots 0 - 383
T7. gap Number of dots between characters 203 dpi (or 300
dpi for 9855/9860 printers). Range: 0 to 99.
Note: For monospaced fonts, the additional spacing is added to the
existing inter-character gap. This is also true for proportionally
spaced fonts, but remember that the inter-character gap varies
with character combinations.
Any number other than 0 or the default number affects your field width.
Default spacing:
Standard 3 dots
Reduced 1 dot
Bold 3 dots
OCRA-like 3 dots
CG Triumvirateä
Typeface Bold
varies with each letter
CG Triumvirateä Typeface varies with each letter
T8. font Style of font. Options:
1
Standard 6 HR2
2 Reduced 10 CG Triumvirateä Typeface Bold
3 Bold 11 CG Triumvirateä Typeface
4 OCRA-like 50 EFF Swiss Bold (scalable)
5 HR1
Or a valid downloaded font selector number.
Fonts 5 and 6 are only for numeric data.
The CG Triumvirateä typefaces support only the ANSI and DOS Code
Page 437 and 850 Symbol Sets. The scalable font does not support Code
Page 1256 (Arabic). See Appendix C for more information.
T9. hgt mag Height magnifier, 1 to 7 times (4 to 255 points for the scalable font - font 50
or downloaded TrueType fonts). Use a magnifier of 1 with proportionally
spaced fonts, because characters lose smoothness at higher
magnifications. See Appendix B, “Fonts,” for more information about fonts.
3-4 Defining Fields