Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 65)

C4. gap Number of dots between characters (203 dots per inch). Range: 0 to 99.
Any number other than 0 or the default number affects your field width.
Default spacing:
Standard 3 dots
Reduced 1 dot
Bold 3 dots
OCRA-like 3 dots
CG Triumvirateä
Typeface Bold
varies with each letter
CG Triumvirateä Typeface varies with each letter
EFF Swiss Bold varies with each letter
C5. font Style of font. Options:
1
Standard 6 HR2
2 Reduced 10 CG Triumvirateä Typeface Bold
3 Bold 11 CG Triumvirateä Typeface
4 OCRA-like 50 EFF Swiss Bold (scalable)
5 HR1
Or a valid downloaded font selector number.
Fonts 5 and 6 are for numeric data only.
The CG Triumvirateä typefaces support only the ANSI and DOS Code
Page 437 and 850 Symbol Sets. The scalable font does not support Code
Page 1256 (Arabic). See Appendix C, "Symbol Sets/Code Pages" for more
information.
C6. hgt mag Height magnifier, 1 to 7 times (4 to 255 points for the scalable font - font 50
or downloaded TrueType fonts). Use a magnifier of 1 with proportionally
spaced fonts, because characters lose smoothness at higher
magnifications. See Appendix B, “Fonts,” for more information about fonts.
C7. wid mag Width magnifier, 1 to 7 times (4 to 255 points for the scalable font - font 50
or downloaded TrueType fonts). Proportionally spaced fonts do not have a
set width. To estimate the size of your field, use the letter “W” for the
widest field or an “L” for an average width field. Find your selected font
and the desired width in Appendix B, “Fonts.”
C8. color There are two types of field color overlay attributes:
Transparent The overlay field (text or constant text) does not block out
(or “erase”) existing fields.
Opaque The overlay field blocks out (or “erases”) existing fields.
Options for standard printer fonts:
B
Opaque, Normal, Black, Normal
D/R/W Opaque, Normal, White, Normal
O Transparent, Normal, Black, Normal
Defining Fields 3-17