Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 133)

D I A G N O S T I C S A N D E R R O R S
8
This chapter explains how to
¨ print test labels
¨ reset the printer
¨ call Technical Support.
Before you call Service, print a test label. The label contains
information to help diagnose mechanical and setup problems.
This chapter also provides explanations of your printer’s errors.
The errors are classified by type and are listed in order. If you
have trouble loading supplies or performing maintenance, refer to
the Operator’s Handbook.
Some errors numbered 400-438 and 500-574 are internal software
errors. Errors numbered 703-758 are supply errors. Follow the
directions provided with the error description to correct the
problem. Errors numbered 900-999 are Hard Printer Failures. If
you cannot clear an error, turn off the printer, wait several seconds
and then turn on the printer. Call Technical Support if you receive
any error message not listed in this chapter.
To clear a data error, press the left A button. If a formatting error
occurs, the label prints; but data may be missing. Correct the
format or batch and resend them to the printer.
Diagnostics and Errors 8-1