Printing a test label 8-2, Enq trailer characters 8-2, Enq/imd characters 8-2 – Avery Dennison Sierra Sport2 9460 Programmer Manual User Manual
Page 134: Packet control characters 8-2, Rs232 trailer characters 8-2, Printing test label 8-2, Printing existing config 8-2, Test label 8-2, Printing 8-2, Printing a test label -2
P r i n t i n g a Te s t L a b e l
1.
From the Diagnostics menu, select Printer. You will see:
Test Label
Sensors
E
D
2.
From the Printer menu, select Test Label.
After you select Test Label, you will see:
Diag Label
Test Pattern
E
D
From the Test Label menu, select Diag Label.
Two test labels print and you return to the Test Label menu. The
diagnostic labels show the printer’s configuration, as well as the model
number and software version number. With version 2.8 or greater
software, the printer supports symbol set 102 (Unicode character
mapping).
Note:
See the System Administrator’s Guide to learn how to print two
other types of diagnostics labels: the test pattern and the grey
scale.
8-2 Diagnostics and Errors
This manual is related to the following products: