Machine faults 8-17, List of machine fault errors 8-17, List of 8-17 – Avery Dennison Sierra Sport2 9460 Programmer Manual User Manual
Page 149: Machine fault errors 8-17, 8-20, Machine faults -17
622
Not enough memory to create the downloaded TrueType
characters in the scalable (vector) fonts buffer. Reconfigure the
printer’s memory and increase the scalable (vector) fonts buffer.
Resend the font, format, and batch packet after reconfiguring the
memory. If the error message persists, call Technical Support.
M a c h i n e F a u l t s
These errors occur when there is a problem with the printer.
Error
Code
Description
703
The printer sensed a calibration of different-sized black marks.
Make sure the correct supply is loaded.
704
Printer has not sensed a supply mark within the specified number
of inches or out of supplies.
Check the
¨
supply tracking
¨
supply marks
¨
black mark sensor position
¨
supply roll for binding.
Press the left A button. If the error continues to appear, change
the supply.
710
Band out of data. Call Technical Support.
711
UART receiving communication error (framing, parity, etc.). Call
Technical Support.
712
Receiving failure or command overrun error. Call Technical
Support.
713
Receiving failure or illegal command. Call Technical Support.
714
Receiving failure or undefined command. Call Technical Support.
Diagnostics and Errors 8-17