Defining the memory configuration packet 2-21, Memory 2-21, Buffer selection 2-21 – Avery Dennison Sierra Sport2 9460 Programmer Manual User Manual
Page 39: Buffer size selection 2-21, Memory configuration 2-21, Memory configuration packet m 2-21, Device selection 2-21, Allocating 2-21, Packet syntax 2-21, Syntax 2-21
See the following graphic for a representation of the following adjustments:
dispense position, backfeed distance, supply position, print position, and
margin position.
Contact Technical Support if you have problems adjusting where the format
prints on the supply.
D e f i n i n g t h e M e m o r y C o n f i g u r a t i o n P a c k e t
Use the memory configuration packet (M) to customize the size of your
printer’s buffers, which gives you greater flexibility in your formats.
Memory must be allocated in 1/2K increments. The memory configuration
packet does not accept decimals, so enter whole numbers. Multiply the
amount to reallocate (in K) by 10. For example,
To reallocate (in K)
Enter this amount
1
10
1.5
15
2
20
2.5
25
153
1530
229.5
2295
Configuring the Printer 2-21