Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 144)

287 The printhead width must be 0.
290 Action must be 0 (disable) or 1 (enable) for the backfeed control
packet or the printer is active.
291 Dispense position must be 0, 10 to 200 dots, or the printer is
active.
292 Backfeed distance must be 0, 10 to 200 dots, or the printer is
active. The backfeed distance can not be greater than the
dispense position.
C h e c k D i g i t E r r o r s
Error
Code Description
310 Check digit scheme number must be 1 to 10.
311 Modulus must be 2 to11.
314 Check digit algorithm must be D (sum of digits) or P (sum of
products).
G r a p h i c E r r o r s
Error
Code Description
325 Duplicating direction must be 0 (insert after) or 1 (insert before) in
duplicate fields for graphics.
327 Amount of row adjustment must be 0 to 999 dots in duplicate
fields for graphics.
328 Duplicate count must be 0 to 999.
340 Bitmap line encoding must be H (hex) or R (run length).
350 Font selector must be 1 to 9999.
351 Font data length must be 68 to 16384.
8-12 Diagnostics and Errors