Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 142)

224 Bar code intercharacter gap must be 0 to 99 dots. (This is also
known as the additional character gap when using Option 50,
Defining Bar Code Densities.)
O n l i n e C o n f i g u r a t i o n E r r o r s
Error
Code Description
251 Power up mode must be 0 (online).
252 Language selection must be 0 (English), 1 (French), 2 (German),
or 3 (Spanish-ES).
253 Batch separator must be 0 (off).
254 Slash zero selection must be 0 (standard zero) or 1 (slashed
zero).
255 Supply type must be 0 (black mark), 1 (die cut), or 2
(non-indexed).
256 Printhead energy selection must be 0 (standard supplies), 1 (fax
paper) or 2 (linerless/synthetic supplies).
257 Feed mode must be 0 (continuous) or 1 (on-demand, if the option
is used).
258 Supply position must be -99 to 99 dots.
259 Contrast adjustment must be -28 to 40 dots.
260 Print adjustment (position) must be -99 to 99 dots.
261 Margin adjustment (position) must be -99 to 99 dots.
262 Speed adjustment must be 0 (default), 20 (2.0 ips), or 30 (3.0 ips).
263 Primary monetary symbol must be 0 (None), 1 (Dollar), 2 (Pound),
3 (Yen), 4 (Deutsche Mark), 5 (Franc), 6 (Peseta), 7 (Lira), 8
(Krona), 9 (Markka), 10 (Schilling), 11 (Rupee), 12 (Ruble), 13
(Won), 14 (Baht), 15 (Yuan), or 16 (Eurodollar).
8-10 Diagnostics and Errors