Avery Dennison Sierra Sport2 9460 Programmer Manual - Manual (Page 115)

S t r u c t u r e d A p p e n d M o d e
QR Code offers a mode called structured append (or concatenated) that
allows you to collect data from multiple QR Code symbols and use that data
elsewhere. For example, the components of a sub-assembly can have
individual QR Codes and the QR Code for the entire assembly contains all
the data from the individual codes. This mode also requires certain
parameters at the beginning of all batch data.
Syntax "mode_id code# #of_div parity, error_cor mask#
data_input char"
mode_id Mode identifier. Use D to indicate the structured append (or concatenated)
mode.
code# Code number of the individual symbol in the concatenated set. You must
use a two-digit number in decimal.
#of_div Total number of symbols in this concatenated set. You must use a two-digit
number in decimal.
parity Parity byte. You must use a two-digit number in hexadecimal. There is no
standard parity byte.
error_cor Level of error correction. Some damaged bar codes may still be scannable
if the error correction is high enough. Options:
H Ultra high reliability level
Q High reliability level
M Standard level
L High density level
Note: As you increase the error correction level, the maximum number of
characters (in the field) decreases.
mask# Mask number. Undefined. Leave blank or use 0.
data_input Type of data input. Options:
A Automatic
M Manual
char Type of characters. Options:
A Alphanumeric
B Binary
K Kanji
N Numeric
Note: In binary mode, the number of characters must be represented by
the 4-digit number in decimal.
Printing 6-7