Figure 4-1, Main menu, Bios – Artesyn ATCA-7365 Installation and Use (May 2014) User Manual

Page 96

BIOS

ATCA-7365 Installation and Use (6806800K65M)

Press when requested. The main menu appears. It looks similar to the one shown in the
following figure.

In order to navigate in setup, use the arrow keys on the keyboard to highlight items on the
menu. All other navigation possibilities are shown at the bottom of the menu.

Additionally, an item-specific help is displayed on the right side of the menu window.

Figure 4-1

Main Menu



Make sure that BIOS is properly configured prior to installing the operating system and
its drivers.



If you save changes in setup, the next time the blade boots up, BIOS will configure the
system according to the setup selections stored. If those values cause the system boot
to fail, reboot and enter setup to get the default values or to change the selections that
caused the failure.

This manual is related to the following products:

ATCA-7360 Installation and Use (May 2014) ATCA-7360 Installation and Use (February 2015) ATCA-7365-CE Installation and Use (Jan 2015) ATCA-7365 Installation and Use (November 2014)