Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 134)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 134
A set bit at a Result DWORD bit position implies that the error associated with that position has
occurred. If there was an error which has no corresponding bit in the Result DWORDs, the bit 0
from the Second DWORD is set (OEM: Unspecified Error).
Table 4-35 POST Error Event Format
Offset Name Format Description
00h Event Type BYTE Event Type = 02h
01h Length BYTE always 0Ch
02h-07h Date/Time Fields BYTE These fields contain the BCD
representation of the date and time
08h-0Bh Result First DWORD UINT32 See Table 4-36 on page 134
0Ch-0Fh Result Second DWORD UINT32 See Table 4-37 on page 134
Table 4-36 Result First DWORD supported POST Errors
Bit Description
3 CMOS RAM Battery Failure. Battery is bad, removed or replaced.
9 Keyboard Not Functional. No console input device found or device error.
12 Memory Decreased in Size. DIMM errors during memory initialization found.
Failed DIMM disabled.
18 RTC Time Not Set. Found invalid Date/Time. Date/Time reset to a valid default
value.
8 OEM: IPMI failure
29 OEM: IPMI Boot Parameter read/write error
30 OEM: IPMI Boot Parameter checksum error
31 OEM: IPMI Boot Parameter locked
Table 4-37 Result Second DWORD supported POST Errors
Bit Description
0 OEM: unspecified error
1 OEM: North Bridge error