Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 116)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 116
4.5.3 IPMI
4.5.3.1 IPMI -> IPMI Watchdog Configuration
Table 4-22 IPMI -> IPMI Watchdog Configuration
Item Values Description
POST Timer (FRB2) Enable,
Disable (Default) Enable or Disable FRB2 timer (POST timer).
This watchdog monitors BIOS initialization tasks.
FRB2 Timer timeout 3, 4, 5, 6 minutes
Default 6 minutes Enter value between 3 to 6 minutes for FRB2 timer
expiration value.
Not available if FRB2 Timer is disabled.
FRB2 Timeout Action Do Nothing,
Reset (Default),
Power Down
Power Cycle Configure how the system should respond if the FRB2
Timer expires.
Not available if FRB2 Timer is disabled.
O/S Watchdog Timer Enable,
Disable (Default) If enabled, starts a BIOS timer just before booting the OS.
The OS has to shut off the watchdog timer when
successfully booted.
O/S Wtd Timer Timeout 1,2,3,5, 7, 10, 15, 20
minutes
Default 5 minutes
Configure the time out of the O/S Boot Watchdog Timer.
Not available if O/S Boot is disabled.
O/S Wtd Timeout Action Do Nothing,
Reset (Default),
Power Down
Configure how the system should respond if the O/S Boot
Watchdog Timer expires. Not available if O/S Boot
Watchdog Timer is disabled.