12 advanced -> local ipmi system event log, 13 advanced -> whea configuration, Table 4-20 – Artesyn ATCA-7365 Installation and Use (May 2014) User Manual
Page 115: Advanced -> local ipmi system event log, Table 4-21, Advanced -> whea configuration, Bios
BIOS
ATCA-7365 Installation and Use (6806800K65M)
115
4.5.2.12 Advanced -> Local IPMI System Event Log
4.5.2.13 Advanced -> WHEA Configuration
Inject Errors
Enabled
Disabled (Default)
Inject Errors before booting a OS: Following errors are
injected: No Console found, IPMI Boot Parameter
Checksum error, CPU Self test failure, Bad Battery.
Table 4-19 SMBIOS Event Log -> SMBIOS Event Log Settings (continued)
Item
Values
Description
Table 4-20 Advanced -> Local IPMI System Event Log
Item
Values
Description
Erase Local SEL
No (Default),
Yes On next reset, Yes On
every reset
Choose options for erasing local SEL.
This option does not take effect until the computer is
restarted.
Table 4-21 Advanced -> WHEA Configuration
Item
Values
Description
WHEA Support
Enable,
Disable (Default)
Enable or disable support for Windows Hardware Error
Architecture.