Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 125)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 125
Update tool for Linux is provided with Basic Blade Services (BBS). For details on how to upgrade
BIOS from Linux, please refer to Basic Blade Services Software for the ATCA-7365 Programmer’s
Reference.
The BIOS can also be upgraded via IPMI - HPM.1 (Hardware Platform Management IPM
Controller Firmware Upgrade). Please refer to
Firmware Upgrade .
4.12 BIOS Error Logging
BIOS supports the following methods to report errors:
 SMBIOS error logging
 IPMI event logging
 Error logging to the console
4.12.1 Runtime Error Logging
BIOS supports Runtime Error Logging for memory errors and PCI errors. See BIOS Setup
Advanced -> Runtime Error Logging. Errors are logged to the IPMI controller and to the SMBIOS
event log.
The Runtime Error Logging can be enabled or disabled. If enabled, the PCI Error Logging can be
enabled or disabled separately.
After performing a BIOS upgrade or after restoring a corrupted BIOS image, all BIOS settings
are reset to their default values except for parameters that are stored in IPMC storage area.
See
Table "System Boot Options Parameter #100 - Supported Parameters" on page 240 .