Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 25)

About this Manual
ATCA-7365 Installation and Use (6806800K65M) 25
Summary of Changes
Part Number Publication Date Description
6806800K65M May 2014 Rebranded to Artesyn.
6806800K65L February 2014 Updated Table 3-1 on page 75 and Table 10-1 on page 275 .
Updated Table 8-33 on page 258 and Table 8-34 on page
259 .
Updated Table "Environmental Requirements" on page 49 .
6806800K65K February 2013 Updated Table 2-4 on page 57 , Switch Settings
6806800K65J January 2013 Updated Standard Compliances on page 38 .
6806800K65H April 2012 Updated Table 2-3 , Table 2-4 , and DIMM Memory Modules on
page 59 . Updated Table 6-71 , Using ipmitool on page 225 ,
and Table 8-16 .
6806800K65G March 2012 Added a Notice in Installation on page 28 and Installation on
page 32 .Updated Table 2-4 .
Updated EMC on page 27 and EMV on page 32 .
6806800K65F September 2011  Updated Figure "Location of AdvancedTCA Connectors"
on page 86
 Chapter 3, Serial Interface Connector, on page 78
 Chapter 3, USB Connectors, on page 79
 Added Chapter 4, iSCSI Setup for Base and Fabric Ethernet .
 Edited Chapter 10, Sensor Data Records
6806800K65F August 2011 Updated Serial Interface Connector on page 78
6806800K65E December 2010  Updated BIOS on page 93
 Updated Figure 1-2 on page 42
 Added Sensor Data Records on page 275
 Updated Figure 2-1 on page 51