Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 119)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 119
4.5.5.1 Boot -> Option ROM Execution
4.5.6 Security
If only the Administrator's password is set, it only limits access to Setup and password is asked
when entering Setup. If only the User's password is set, then this is a power on password, and
must be entered to boot or enter Setup. During setup, the user will have Administrator rights.
Table 4-26 Boot -> Option ROM Execution
Item Values Description
Front Panel Net Boot Enabled (Default),
Disabled Controls execution of the Option ROM for the Front Panel
Ethernet controller. Select "Enabled" when Front Panel
Boot is required.
Base Network Boot Enabled (Default),
Disabled Controls execution of the Option ROM for both Base
Network Ethernet controller. Select "Enabled" when Base
Network Boot is required.
Fabric Network Boot Enabled (Default),
Disabled Controls execution of the Option ROM for both Fabric
Network Ethernet controller. Select "Enabled" when
Fabric Network Boot is required.
ARTM Network Boot Enabled,
Disabled (Default) Controls execution of the Option ROM for RTM Network
Ethernet controller. Select "Enabled" when RTM Network
Boot is required.
ARTM SAS Boot Enabled (Default),
Disabled Controls execution of the Option ROM for RTM SAS
controller. Select "Enabled" when RTM SAS Boot is
required.
ARTM FC Boot Enabled,
Disabled (Default) Controls execution of the Option ROM for RTM Fiber
Channel controller. Select Enabled when RTM Fiber
Channel Boot is required.