Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 274)

FRU Information and Sensor Data Records
ATCA-7365 Installation and Use (6806800K65M) 274
9.4 Power Configuration
9.5 Sensor Data Records
The sensors available on the blades are shown in the table below. See the Table 9-8 on page 278
for a detailed description of the Sensor Data Records.
Table 9-6 Power Configuration
Item Value Description
Dynamic power
reconfiguration support No While the blade is powered, it
supports only one power level.
Dynamic power
configuration No The power level is fixed and does
not change).
Number of power draw
levels 2 The amount of possible power
levels
Early Power Draw Levels,
Watt - Complete early power level
including IPMC
Steady state Power Draw
Levels, Watt 2.0 GHz 6x4GB DDR3 + RTM =
180 - 220 Watts
Max - 260 Watts Complete steady power
consumption including IPMC
Transition from early to
steady levels, sec 0s -
Table 9-7 IPMI Sensors Overview
Sensor Name Sensor Type
Sensor
Number
1.2V Voltage 0x0A
1.5V Voltage 0x09
1.5V DDR3 Voltage 0x0C
1.8V Eth Voltage 0x08
12.0V Voltage 0x05