Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 77)

Controls, Indicators, and Connectors
ATCA-7365 Installation and Use (6806800K65M) 77
3.2.3 Connectors
The blade provides the following connectors at its face plate:
 1x Ethernet
 1x Serial
 2x USB
 VGA Connector (supported on ATCA-7365-D-0GB-V, ATCA-7365-D-24GB-V, and ATCA-7365-D-
48GB-V)
3.2.3.1 Ethernet Connector
The blade provides one Ethernet 1000Base-T interface connector at its face plate. It is intended
for blade configuration and constitutes, besides the two AdvancedTCA Base interfaces, a third
Ethernet interface to access the blade. The location of the Ethernet connector is shown in the
following figure.
Figure 3-6 Location of Ethernet Connector