9 advanced -> uefi network stack, Table 4-17, Advanced -> uefi network stack – Artesyn ATCA-7365 Installation and Use (May 2014) User Manual
Page 113: Bios

BIOS
ATCA-7365 Installation and Use (6806800K65M)
113
4.5.2.9
Advanced -> UEFI Network Stack
Parity
None (Default), Even,
Odd, Mark, Space
A parity bit can be sent with the data bits to detect
some transmission errors. Even: parity bit is "0" if the
num of 1's in the data bits is even. Odd: parity bit is "0"
if num of 1's in the data bits is odd. Mark: parity bit is
always "1". Space: Parity bit is always "0". Mark and
Space Parity do not allow for error detection.
Stop Bits
1 (Default), 2
Stop bits indicate the end of a serial data packet. The
standard setting is 1 stop bit. Communication with
slow devices may require more than 1 stop bit.
Recorder Mode
Enabled,
Disabled (Default)
When enabled, only text characters, not control
characters are sent.
This is used to capture Terminal data.
Resolution 100x31
Enabled,
Disabled (Default)
Enables or disables extended terminal resolution.
Legacy OS Redirection
80x24 (Default), 80x25
Specifies the Number of Rows and Columns
supported by legacy serial redirection.
Table 4-16 Serial Port Console Redirection -> Console Redirection Settings (continued)
Item
Values
Description
Table 4-17 Advanced -> UEFI Network Stack
Item
Values
Description
UEFI Network stack
Enable,
Disable (Default)
Enable/Disable the UEFI network stack. This is needed for UEFI
network boot (PXE and iSCSI).