Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 100)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 100
4.4.4 iSCSI Setup for Base and Fabric Ethernet
The board supports boot from iSCSI block devices connected to Base or Fabric Ethernet. To
enable the iSCSI boot, select the iSCSI item of Fabric Network Boot setup question in the Boot
-> Option ROM Execution sub menu.
In order to enter iSCSI setup press Ctil-D when the following message is displayed:
Figure 4-4 Option ROM Execution
Intel(R) iSCSI Remote Boot version 2.7.53
Copyright (c) 2003-2010 Intel Corporation. All rights reserved.
Press ESC key to skip iSCSI boot initialization.
Press to run setup...