Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 131)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 131
4.12.4 SMBIOS Error Logging
See System Management BIOS (SMBIOS) Reference Specification Version: 2.7.0 Chapter 7.16 System
Event Log (Type 15). The specifications can be downloaded from
http://www.dmtf.org/standards/smbios
The event log is a fixed length area in BIOS flash. Information about the SMBIOS event log area
can be obtained from the DMI structure System Event Log Type 15. The DMI table can be read
by the Linux tool dmidecode.
The "Log Change Token" in SMBIOS Type 15 structure is not supported.
The following SMBIOS Events are supported:
 Single-bit ECC memory error
 Multi-bit ECC memory error
System Firmware
Progress (0Fh) Offest 00h System Firmware Error
Supported Event Data3:
70h Front Panel Network not detected
78h Base Network not detected
79h Base Network reduced PCI performance
7Ah Base Network Device Error
80h Fabric Network not detected
81h Fabric Network reduced PCI performance
82h Fabric Network Device Error
88h Update Channel Network not detected
89h Update Channel Network reduced PCI performance
8Ah Update Channel Network Device Error
90h Reboot after a FRB2 Watchdog Timeout
91h Reboot after a BIOS/POST Watchdog Timeout
92h Reboot after a OS Load Watchdog Timeout
93h Reboot after a SMS/OS Watchdog Timeout
94h Reboot after a OEM Watchdog Timeout
Table 4-30 BIOS Supported IPMI Events (continued)
Sensor Event