Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 105)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 105
Execute Disable Bit Enabled (Default)
Disabled XD can prevent certain classes of malicious buffer overflow
attacks when combined with a supporting OS, e.g.
Windows Server 2003 SP1, Windows Server 2008,
Windows XP SP2, SuSE Linux 9.2 and newer, RedHat
Enterprise 3 Update 3 and newer.)
Hardware Prefetcher Enabled (Default)
Disabled To turn on/off the L2 Cache (MLC streamer) prefetcher.
See
CPU Performance Settings on page 120
Adjacent Cache Line
Prefetch Enabled (Default)
Disabled To turn on/off prefetching of adjacent cache lines to L2
cache. See chapter 4.5 CPU Performance Settings
L1 Data Prefetcher Enabled (Default)
Disabled Enable/Disable L1 Data Prefetcher.
See
CPU Performance Settings on page 120
Data Reuse Optimization Enabled (Default)
Disabled
Data Reuse Performance Optimization for Server
workloads.
See
CPU Performance Settings on page 120
Intel Virtualization Enabled (Default)
Disabled When enabled, a VMM can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.
Turbo Mode Enabled (Default)
Disabled Enable/Disable Turbo Mode. Turbo Mode allows processor
cores to run faster than the marked frequency if the
physical processor is operating below power, temperature
and current specification limits.
Performance/Watt Traditional (Default),
Power Optimized Optimized - Turbo Boost engages after highest
performance state is sustained for more than two seconds.
Traditional Intel Turbo Boost Technology is engaged
immediately when possible.
CPU C3 Report Enabled
Disabled (Default) Enable/Disable CPU C3 report to OS via ACPI table. CPU C3
state corresponds with ACPI C2 state.
CPU C3: Execution Clock is stopped. Core caches flushed.
Intel recommends disabling CPU C3 report to OS.
CPU C6 report Enabled (Default)
Disabled Enable/Disable CPU C6 report to OS via ACPI table. CPU C6
state corresponds with ACPI C3 state.
CPU C6: Execution Clock stopped, Core states stored in the
Last Level Cache, Core caches flushed.
Intel recommends enabling CPU C6 report to OS.
Package C State limit C0, C1, C3, C6, C7,
No Limit (Default) Specifies the lowest C-state (Low Power idle state) for the
CPU package. Lower C states correspond to lower power
consumption and with a longer C-state entry/exit latency.
Table 4-5 CPU Configuration (continued)
Item Values Description