3 usb connectors, Figure 3-9, Serial interface connector pinout – Artesyn ATCA-7365 Installation and Use (May 2014) User Manual

Page 79: Figure 3-10, Location of usb connectors

Text mode
Original mode

Controls, Indicators, and Connectors

ATCA-7365 Installation and Use (6806800K65M)

The pinout of the serial interface connector is shown below.

3.2.3.3

USB Connectors

The blade provides two USB connectors at its face plate. They are compliant to the USB 2.0
standard and correspond to the blade's USB interfaces 3 and 4. Their location is shown in the
following figure.

Figure 3-9

Serial Interface Connector Pinout

Figure 3-10 Location of USB Connectors

This manual is related to the following products:

ATCA-7360 Installation and Use (May 2014) ATCA-7360 Installation and Use (February 2015) ATCA-7365-CE Installation and Use (Jan 2015) ATCA-7365 Installation and Use (November 2014)