Artesyn ATCA-7365 Installation and Use (May 2014) - Manual (Page 110)

BIOS
ATCA-7365 Installation and Use (6806800K65M) 110
4.5.2.5 Advanced -> SATA Configuration
4.5.2.6 Advanced -> USB Configuration
Table 4-12 Advanced -> SATA Configuration
Item Values Description
SATA Mode Disable, IDE Mode
(Default), AHCI Mode,
RAID Mode Select the SATA Mode:
Disable: Disable the SATA controller
IDE Mode: SATA controller works in IDE
compatible mode.
AHCI Mode: STATA controller works in AHCI Mode
RAID Mode: STATA controller works in RAID Mode,
Additionally a SATA RAID Option Rom is loaded.
SATA Controller 0 Disable, Enhanced,
Compatible (Default) Disable or select mode of Serial ATA Controller 0.
Enhanced: work in SATA mode
Compatible: work in IDE compatible mode.
Only available when SATA Mode is set to IDE
mode.
SATA Controller 1 Disable,
Enhanced (Default) Disable or select mode of Serial ATA Controller 1.
Enhanced: work in SATA mode
Only available when SATA Mode is set to IDE
mode.
Table 4-13 Advanced -> USB Configuration
Item Values Description
Legacy USB Support Enabled (Default)
Disabled Enables Legacy USB support. AUTO option disables
legacy support if no USB devices are connected.
"Disabled" option will keep USB devices available only
for EFI applications.
EHCI Hand-off Enabled (Default)
Disabled Select "Disabled" to enable a workaround for OS
without EHCI hand-off support.
Port 60/64 Emulation Enabled (Default)
Disabled Enables I/O port 60h/64h emulation support. This
should be enabled for the complete USB keyboard
legacy support for non-USB aware OS.