Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 94)

BIOS
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 94
Base Network Boot Controls execution of the Option ROM for the Base Ethernet
controller.
Options: Disabled and Enabled.
Default is Enabled.
Fabric Network Boot Controls execution of the Option ROM for the Fabric Interface
Ethernet.
Options: Disabled and Enabled.
Default is Disabled.
ARTM Network Boot Controls execution of the Option ROM for the Ethernet on the
ARTM.
Options: Disabled and Enabled.
Default is Disabled.
ARTM SAS Boot Controls execution of the Option ROM for the SAS controller on
the ARTM.
Options: Disabled and Enabled.
Default is Enabled.
Boot from USB Devices Enable or Disable booting from USB Devices. Options: Disabled
and Enabled.
Default is Enabled.
BIOS Watchdog Enable or Disable BIOS POST Watchdog.
Options: Disabled and Enabled.
Default is Enabled.
BIOS Watchdog Timeout Choose Timeout value for BIOS POST Watchdog Expiration value.
It is not available if the BIOS Watchdog is disabled.
Range: 180 ~ 6000.
Default is 180.
O/S Boot Watchdog Enable or Disable O/S Watchdog Timer. It is not available if the O/S
Watchdog is disabled.
Options: Disabled and Enabled.
Default is Disabled.
O/S Boot Watchdog Timeout Choose Timeout value for O/S Boot Watchdog Timer.
Range: 180 ~ 6000.
Default is 300.
Table 4-8 Boot Configuration Description (continued)
Field Description