2 serial output commands, Table 8-23, Feature selector assignments – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 202: Table 8-24, Serial output commands, Supported ipmi commands
Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
202
8.3.2
Serial Output Commands
Response Data
1
Completion Code. Generic plus the following command-specific
completion codes:
80h = feature selector not supported.
2:4
Artesyn IANA Number (0065CDh). LSB first.
5
Feature Configuration
6
Persistency / Duration
Table 8-23 Feature Selector Assignments
Feature Selector
Description
E2h
Boot Firmware Automatic Switchover Function Enable/Disable
Table 8-22 Get Feature Configuration Command (continued)
Byte
Data Field
Table 8-24 Serial Output Commands
Command Name
NetFn (Request/Response)
CMD
Description
Set Serial Output
0x2E/0x2F
0x15
Get Serial Output
0x2E/0x2F
0x16
This manual is related to the following products: