Introduction, 1 features, Chapter 1 – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 37

Chapter 1
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
37
Introduction
1.1
Features
The ATCA-7370 is a high performance dual processor AdvancedTCA Server blade and
AdvancedTCA Node board, designed according to PICMG 3.0 Revision 3.0 Advanced TCA Base
Specification. ATCA-7370 is a single board computer that offers a complex powerful
processing through a dual eight-core Intel Xeon E5-2648L processor, and support for up to 128
GByte DDR3 memory and a single processor version.
Furthermore ATCA-7370 provides local storage, standard I/O and redundant Ethernet
connections to the back plane's Base Interfaces (PICMG3.0) and Fabric Interfaces (PICMG 3.1
Option1,9). Another important feature is that ATCA-7370 provides system management
capabilities and is hot swap compatible based on the ATCA specification.
A single processor variant of the ATCA-7370 is also available. It is called ATCA-7370-S.
The following lists the main feature of ATCA-7370:
Form factor: Single slot ATCA (280mm x 322mm)
Processor: Intel Xeon E5-2648L eight core processor
PCH (chipset):C604 chipset
Memory: Total of eight DDR3 DIMM slots, supports up to 128 GB memory with speed rate
up to DDR3-1600 and 4 slots in case of single processor variant.
Base interface: Dual 10/100/1000Base-T Ethernet
Fabric Interface: Dual 1G/10Gbps Ethernet interfaces, support PICMG3.1 option 1 and 9
Cave Creek Mezzanine card for compression/decompression or security (optional)
Front Panel
–
One RJ45 GE Ethernet Port, the other RJ45 GE port (the lower one) is reserved.
–
Two USB2.0 Ports
–
One serial console
–
Reset button
Onboard IPMI management controller (IPMC) implements IPMI version 1.5
Onboard Glue Logic FPGA for IPMC extension and onboard Control register