5 mean time between failures, 6 ordering information, Table 1-3 – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 43: Blade variants - ordering information, Table 1-4, Blade accessories - ordering information, Introduction

Introduction
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
43
1.5
Mean Time Between Failures
The following table specifies the Mean Time Between Failures (MTBF) data.
The following table specifies the environmental conditions required for the blade.
1.6
Ordering Information
As of the printing date of this manual, this guide supports the models listed below.
As of the printing date of this manual, the following board accessories are available.
ATCA-7370 blade
5470 fit (182,815 hours)
RTM-7370 blade
950 fit (1,052,631 hours)
Standard for calculation
SR332
Quality Level
Quality Level II is most common
Environment
Typically Ground, Fixed, Controlled
Assembly Ambient Temperature
40
o
C
Confidence Level
60 %
Table 1-3 Blade Variants - Ordering Information
Product Name
Description
ATCA-7370
ATCA BLADE, DUAL INTEL XEON E5-2600 SERIES 8-CORE PROCESSOR,
0GB, 10G SUPPORT, NSN VARIANT.
ATCA-7370-0GB-S
Single Board Variant.
Table 1-4 Blade Accessories - Ordering Information
Accessory
Description
RTM-ATCA-737x
RTM for the ATCA-737x product series, 2X GBE (SFP), 2X
slot for optional HDD, NSN variant.