Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 234)

FRU Information and Sensor Data Records
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 234
7 PWR Status OEM
0xD7
Sensor-
specific
discrete
0x6F 0x0 Synchor Pwr Entr
Module:
[6] = VOUT_low
[5] = Hotswap
[4] = Holdup
[2] = Alarm
[1] = Enable_B
[0] Enable_A
Emerson Pwr Entry
Module:
[7] = DIG_Fault
[6] = HUCapEngage
[5] = Hotswap_Enable
[4] = HUCap_Switch
[3] = Alarm_Control
[1] = DIG_Alarm
[0] = Sec_MCU_Fault
All other bits are
reserved [7:6] = Pwr Entry
Module
0 = Synchor
1 = Emerson
Emerson Pwr
Entry Module:
[2] = DIG_EnableA
[1] = DIG_EnableB
[0] = Mcu_Fault
All other bits are
reserved 0x0: Pwr Entry
Module Status
Change detected Asrt Auto
8 Inlet Temp Temp
0x01 Threshold
0x01 reading threshold unr uc unc Asrt / Deass Auto
9 Outlet Temp Temp
0x01
Threshold
0x01 reading threshold unr uc unc Asrt / Deass Auto
10 Board Temp Temp
0x01
Threshold
0x01 reading threshold unr uc unc Asrt / Deass Auto
Table 9-3 Sensor Data Records (continued)
Sensor
Number Sensor Name Sensor Type Event/Reading
Type
Event
Data
Byte 1 Event Data Byte 2
Event Data Byte 3
Event Threshold/
Description Assertion
Deassertion Rearm