Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 38)

Introduction
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 38
 RTM Interface
– Total 36 PCI-E Lanes on three Zone3 connectors.
– 4x SAS port
– 1x USB interfaces
– IPMI Management bus
 BIOS Chip: Up to 8MB onboard Boot and 8 MB Recovery Boot Flash (SPI)
1.2 Standard Compliances
The product is designed to meet the following standards.
Table 1-1 Standard Compliances
Standard Description
SN29500/8 Reliability requirements
MIL-HDBK-217F
SR-332
TR-NWT-000357
IEC 60068-2-1/2/3/13/14 Climatic environmental requirements. The product
can only be used in a restricted temperature range.
IEC 60068-2-27/32/35 Mechanical environmental requirements
IEC 60950-1, EN 60950-1, UL/CSA
60950-1 Safety requirements
UL 94V-0/1, Oxygen index for PCBs
below 28% Flammability