2 oem get performance mode (0x22), Table 8-32, Oem get performance mode command – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 208: Supported ipmi commands

Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
208
8.3.4.2
OEM Get Performance Mode (0x22)
This command can be used to retrieve current performance mode.
Table 8-32 OEM Get Performance Mode Command
Byte
Data Field
Request Data
1
LSB of NSN IANA Enterprise Number. A value of 2Ah shall be
used.
2
2nd byte of NSN IANA Enterprise Number. A value of 6Fh shall be
used.
3
MSB of NSN IANA Enterprise Number. A value of 00h shall be
used.
4
00h-0Fh = FRU ID, 0h for ACPI5-A
Response Data
1
Completion Code.
2
LSB of NSN IANA Enterprise Number. A value of 2Ah shall be
used.
3
2nd byte of NSN IANA Enterprise Number. A value of 6Fh shall be
used.
4
MSB of NSN IANA Enterprise Number. A value of 00h shall be
used.
5
Power performance mode:
[7:1] - Reserved
[0] - Power State Mode Level
--0h normal performance mode
--1h reduced performance mode
6:7
Power draw value of reduced performance mode, the unit is
watt, LS byte first.
8:9
Power draw value of normal performance mode, the unit is
watt, LS byte first.