Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 132)

Maps and Registers
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 132
7:4 Reserved 0 LPC: r
Table 6-23 Logical Device Primary Interrupt Register (continued)
Index Address: 0x70
Bit Description Default Access
An Interrupt is activated by enabling this device (offset 0x30), setting this register to a non-
zero value and setting any combination of bits 0-4 in the corresponding UART IER and the
occurrence of the corresponding UART event (i.e. Modem Status Change, Receiver Line Error
Condition, Transmit Data Request, Receiver Data Available or Receiver Time Out) and setting
the OUT2 bit in the MCR.
Table 6-24 Logical Device 0x74 Reserved Register
Index Address: 0x74
Bit Description Default Access
7:0 Reserved 0x04 LPC: r
Table 6-25 Logical Device 0x75 Reserved Register
Index Address: 0x75
Bit Description Default Access
7:0 Reserved 0x04 LPC: r
Table 6-26 Logical Device 0xF0 Reserved Register
Index Address: 0xF0
Bit Description Default Access
7:0 Reserved 0 LPC: r