4 oem set/get performance commands, Table 8-29, Oem get acpi power state command – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 206: Table 8-30, Oem set/get performance commands, Supported ipmi commands
Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
206
8.3.4
OEM Set/Get Performance Commands
Table 8-29 OEM Get ACPI Power State Command
Byte
Data Field
Request Data
1
LSB of Artesyn IANA Enterprise Number. A value of CDh shall be
used.
2
2nd byte of Artesyn IANA Enterprise Number. A value of 65h
shall be used.
3
MSB of Artesyn IANA Enterprise Number. A value of 00h shall be
used.
Response Data
1
Completion Code.
2
LSB of Artesyn IANA Enterprise Number. A value of CDh shall be
used.
3
2nd byte of Artesyn IANA Enterprise Number. A value of 65h
shall be used.
4
MSB of Artesyn IANA Enterprise Number. A value of 00h shall be
used.
5
ACPI System Power State
[7:2] - reserved
[1:0] - System Power State enumeration
--00h set S0 working
--01h set S3 typically equates to "suspend-to-RAM"
--02h S5 soft off
--03h unknown
Table 8-30 OEM Set/Get Performance Commands
Command name
NetFn
(Request/Response)
CMD
Description
OEM Set Performance Mode
0x2E/0x2F
0x21