Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 112)

Functional Description
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 112
5.12 IPMI Over LAN
IPMI messages can be transferred over LAN (Base interface) using the RMCP protocol, as
defined in the IPMI v1.5 specification, or using the RMCP+ protocol extension, as defined in the
IPMI v2.0 specification. The RMCP/RMCP+ packets are formatted to contain IPMI request and
response messages, plus additional messages for discovery and authentication.
The IPMI-over-LAN functionality is supported at a level that allows the Serial-over-LAN feature
to be implemented.
5.13 USB 2.0 Interface
The C604 chipset provides internal USB1.1/ USB 2.0 host controllers with up to 14 USB2.0
ports. Two ports are routed to the faceplate, one port is routed to the RTM on ATCA-7370. The
ports available at the faceplate are routed to a dual stacked connector. The ports are USB 2.0
compliant.