Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 189)

Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 189
8.1.7.1.2 System Boot Options Parameter #97
This is an Artesyn-specific OEM parameter as defined in the following table.
8.1.7.1.3 System Boot Options Parameter #98
This is an Artesyn-specific OEM parameter.
Table 8-10 System Boot Options Parameter #97
Data Byte Description
1 POST Type
Data 1 - Set Selector. This is the processor ID for which the boot option is to be
set.
2 Data 2 - POST Type Selector. This parameter is used to specify the POST type
that the IPMC will execute.
0x00: Short POST
0x01: Long POST
0x02 to 0xFF: Not used
The System Boot Options parameter #97 is non-volatile. It survives the IPMC power cycle,
reset and may survive the IPMC firmware upgrades.