Supported ipmi commands, 1 standard ipmi commands, 1 global ipmi commands – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 183: 2 system interface commands, Table 8-1, Supported global ipmi commands, Table 8-2, Supported system interface commands, Chapter 8

Chapter 8
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
183
Supported IPMI Commands
8.1
Standard IPMI Commands
The IPMC is fully compliant to the Intelligent Platform Management Interface v1.5. This section
provides information about the supported IPMI commands.
8.1.1
Global IPMI Commands
The IPMC supports the following global IPMI commands.
8.1.2
System Interface Commands
The IPMC supports the following IPMI commands to support the system messaging interfaces.
Table 8-1 Supported Global IPMI Commands
Command
NetFn (Request/Response)
CMD
Get Device ID
0x06/0x07
0x01
Cold Reset
0x06/0x07
0x02
Warm Reset
0x06/0x07
0x03
Get Self Test Results
0x06/0x07
0x04
Get Device GUID
0x06/0x07
0x08
Table 8-2 Supported System Interface Commands
Command
NetFn
(Request/Response)
CMD
Set BMC Global Enables
0x06/0x07
0x2E
Get BMC Global Enables
0x06/0x07
0x2F
Clear Message Flags
0x06/0x07
0x30
Get Message Flags
0x06/0x07
0x31
Get Message
0x06/0x07
0x33
Send Message
0x06/0x07
0x34
Set Channel Access
0x06/0x07
0x40