Altera Cyclone II DSP Development Board - Manual (Page 55)

Altera Corporation Reference Manual 2–47
August 2006 Cyclone II DSP Development Board
Cyclone II DSP Development Board Components
Expansion TI-EVM Connectors (U34, U40)
The TI-EVM connectors connect to the EMIF connectors on the
TMS320C6416 board. U34 (labeled PERIPHERAL) and U40 (labeled
MEMORY) are located on the back of the Cyclone II DSP development
board.
The PERIPHERAL Interface (U34) on the Cyclone II DSP development
board connects to the External Peripheral Interface (J3) on the
TMS320C6416 board.
The MEMORY Interface (U40) on the Cyclone II DSP development board
connects to the External Memory Interface (J4) on the TMS320C6416
board.
Table 2–25 lists the TI-EVM connector pin-outs.
GND J23.18
GND J23.20
B_PROTO_RESETn J15.1
V2 B_PROTO_CARDSELn J15.38
PROTO_3_3V_5V J22.2
PROTO_CLK_OSC J23.9
PROTO_CLKIN R20 PROTO_CLKIN J23.11
PROTO_CLKOUT AD13 PROTO_CLKOUT J23.13
Note to Table 2–24 :
(1) Unlisted pins have no connection.
Table 2–24. Expansion Prototype Connector Pin Numbers - J15, J22 & J23 (Part 3 of 3)
Cyclone II (U12) Signal
Name
Cyclone II (U12) Pin
Number
Proto Debug Signal Name Proto Debug Pin Number (1)
Table 2–25. TI-EVM Connector Pin-Outs (Part 1 of 4)
Schematic Signal
Name
TI-EVM Connector (U34, U40)
Pin Number
Cyclone II (U12) Pin
Number
EVM_A10 U40.16 D26
EVM_A11 U40.15 J26
EVM_A12 U40.14 D25
EVM_A13 U40.13 K24
EVM_A14 U40.10 D23