ADLINK PCI-8164 - Manual (Page 36)

24 Installation
2.7 Driver installation
PCI-8164/PXI-8164
1. Place the ADLINK All-In-One CD to the CD-ROM drive.
2. When the Autorun screen appears, select Driver Instal-
lation > Motion Control > PCI-8164/PXI-8164.
3. Follow screen procedures to install, then restart the sys-
tem after installation is completed.
NOTE When using MS-DOS, install the drivers from the \Motion
Control\PCI-8164\DOS_BC directory of the CD.
MPC-8164
1. Place the ADLINK All-In-One CD to the CR-ROM drive.
2. When the Autorun screen appears, select Driver Instal-
lation > Motion Control > MPC-8164.
3. Launch the MPC-8164 Add/Remove utililty from the Start
menu or installed directory to register the new card. The
I/O address and IRQ channel must be the same with the
settings on the board.
4. Restart the computer.
NOTES When using MS-DOS, install the drivers from the \Motion
Control\MPC-8164\DOS_BC directory of the CD.
You may also download the latest software from the
ADLINK website (www.adlinktech.com).