5 motion creator, 5motion creator – ADLINK PCI-8164 User Manual

Page 161

Text mode
Original mode

Motion Creator

149

Motion Creator

After installing the hardware (Chapters 2 and 3), it is necessary to
correctly configure all cards and double-check the system before
running. This chapter gives guidelines for establishing a control
system and manually testing the cards to verify correct operation.
The Motion Creator software provides a simple yet powerful
means to setup, configure, test, and debug a motion control sys-
tem that uses the PCI-/MPC-/PXI-8164 cards.

Note: Motion Creator is only available for Windows

95/98 or Win-

dows

NT/2000/XP operating system and a monitor with a screen

resolution of 800x600 or higher. Motion Creator does not DOS
environments.