ADLINK PCI-8164 - Manual (Page 168)

156 Motion Creator
5.3.4 Operation menu:
This menu changes the settings for a selected axis, including
velocity mode motion, preset relative/absolute motion, manual
pulse move, and home return.
1. Position:
Z Command: displays the value of the command counter.
The related function is _8164_get_command().
Z
Feedback: displays the value of the feedback position
counter. The related function is
_8164_get_position()
Z Pos Error: displays the value of the position error
counter. The related function is
_8164_get_error_counter().
Z
Target Pos: displays the value of the target position
recorder. The related function is
_8164_get_target_pos().
2. Position Reset: Sets all positioning counters to a speci-