ADLINK PCI-8164 - Manual (Page 175)

Function Library 163
6 Function Library
This chapter describes the supporting software for the PCI-/MPC-/
PXI-8164 card. You can use these functions to develop programs
in C, C++, or Visual Basic. If Delphi is used as the programming
environment, you need to manually transform the header files
8164.h.
6.1 List of Functions
Initialization Section 6.3
Pulse Input/Output Configuration Section 6.4
Function Name Description
_8164_initial Card initialization
_8164_initialx
Card initialization with I/O base address and IRQ
Channel
_8164_close Card Close
_8164_get_base_addr Get base address of 8164
_8164_get_irq_channel Get the 8164 card’s IRQ number
_8164_delay_time
Delay execution of program for specified time in
units of ms.
_8164_config_from_file
Configure 8164 cards according to configuration
file i.e. 8164.ini, which is created by Motion Cre-
ator.
_8164_version_info Check the hardware and software version
Function Name Description
_8164_set_pls_outmode Set pulse command output mode
_8164_set_pls_iptmode Set encoder input mode
_8164_set_feedback_src Set counter input source