EVCO EPK4BHQ1AH Installer manual - Manual (Page 6)

EVCO S.p.A. c-pro 3 NODE kilo AHU | Application manual ver. 1.0
page 6 of 114
1 GENERALITIES
1.1 Description
c-pro 3 NODE kilo AHU is a controller for the management of single or double flow (with cross-flows or rotative
recovery heat exchanger) air handling units with seasonal (with 1 coil, heating/cooling) and annual (with 2 coils,
cooling/reversible and heating/heating support/post-heating) operation; the coils can be electric or by water.
They are available in blind version with a possible remote user interface (Vroom); the interface incorporates a
temperature and humidity sensor (which survey can be transmitted via BUS).
The controller is able to manage the return fan and the supply fan independently (up to 3 speeds or modulating); it is
also able to manage the outdoor damper, the bypass damper and the mixing chamber damper.
It has the humidifier management (both “on-off” and modulating), the ventilation modulation according to the supply
static pressure and according to the room air quality.
The variety of available communication ports (RS-485, CAN, USB and Ethernet) and supported communication
protocols make easier the integration of the device in systems.
Installation is on DIN rail, into a control panel.
Purchase codes
Controller (c-pro 3 NODE kilo AHU): EPK4BHX1AH
Remote user interface (Vroom): EPV4RBR