EVCO EPK4BHQ1AH Installer manual - Manual (Page 54)

EVCO S.p.A. c-pro 3 NODE kilo AHU | Application manual ver. 1.0
page 54 of 114
Screen from which the coil type can be configured (Coil 1 type), selecting with “Water” if water is chosen or selecting
“RH” in the case of direct expansion.
If selected as coil type 1, water, I can select the method (Coil 1 mode) with which to manage: with “Cold” with cold
water, “Hot” for hot water or “Mix” for hot/cold water.
If the previous screens had selected a coil 1 type, with direct expansion (RH), I can proceed selecting the steps (see
screen below)
6.8.4 Set up of Coil 2 type configuration