EVCO EPK4BHQ1AH Installer manual - Manual (Page 21)

EVCO S.p.A. c-pro 3 NODE kilo AHU | Application manual ver. 1.0
page 21 of 114
4.7 RTC menu
This menu contains the functionality of the systems Real Time Clock:
SETTING THE REAL TIME CLOCK
4.8 Alarms menu
This menu allows viewing and acknowledging of alarms.
SHOW ALARMS
SHOW ALARM HISTORY
The SHOW ALARMS menu shows the active alarms. Each time the DOWN key is pressed, the next active alarm is
shown. If no alarms are present, the message “NO ALARMS” is displayed.
The alarm can be acknowledged by pressing the ENTER key for 2 seconds, when the alarm condition is not active
anymore.
The alarm history page will show the latest alarm. To view the preceding alarm press ENTER key. This can be repeated
until the first alarm is displayed. The history is viewed in a circular manner.
By pressing the ESC key or after 60 seconds of no key activity, the main page will be displayed.
4.9 Project and firmware versions
Press simultaneously the UP+DOWN keys for about 2 seconds, then press the ENTER key on the InFolabel.
Information on the project and controller firmware versions is displayed sequentially, namely:
Project Number <-> Project Version <-> Project Revision <->
Firmware Number <-> Firmware Version <-> Firmware Revision <->
To scroll this information, use the UP and DOWN keys. To return to the application pages, press the ESC key.