Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 54)

Figure 70. Setup > Drives > SCSI Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l
If the button beneath the OK softkey is pressed, the current field values are accepted, and the Drives Submenu is displayed.
l If the button beneath the Change Drive softkey is pressed, the drive number is changed.
l If the button beneath the Next softkey is pressed the next field in the list is made the active field. Refer to Figure 71 .
l If the button beneath the Cancel softkey is pressed, the Drives Submenu is displayed.
Figure 71. Setup > Drives > SCSI > SCSI ID New Dialog
Refer to the Table associated with Figure 70 .
To choose one of the four selections, follow the step.
Step 2 Press the button beneath the desired softkey.
l
If the button beneath the Up softkey is pressed, the currently active field is increased.
l If the button beneath the Down softkey is pressed, the currently active field is decreased.
l If the button beneath the Next softkey is pressed, the Drive field is made the active field. Refer to Figure 70 .
l If the button beneath the Cancel softkey is pressed, the Drives Submenu is displayed.
Utils Submenu
When Utils is selected, the Utils Submenu is displayed. See Figure 72 . This submenu contains a collection of utility routines. This submenu offers
four selections.
Figure 72. Setup > Utils Submenu
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
Field Value Description
Drive 01 .. 06 Drive number
SCSI ID: Current 00 .. 15 Current SCSI ID of the selected drive
SCSI ID: New 00 .. 15 New SCSI ID of the selected drive
Drives with this ID
1 .. 06 Indicates the drive with the same SCSI ID as the drive selected
None No drive set with the same SCSI ID